welcome to d-link setup wizard - internet connection setup

This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet.

Step 1: Setup LAN Settings

Step 2: Setup DDNS Settings

Step 3: Server Name Settings

Step 4: Setup Time Zone

step 1: setup lan settings

Please select whether your camera will connect to the Internet with a DHCP connection, Static IP address or PPPoE. If your camera is connected to a router, or you are unsure which settings to pick, D-Link recommends that you keep the default selection of DHCP connection. Otherwise, click on Static IP address to manually assign an IP address before clicking on the Next button.

DHCP Connection

Static IP Address

IP Address
Subnet Mask
Default Gateway

PPPoE

User ID
Password

Primary DNS
Secondary DNS

step 2: Setup DDNS Settings

If you have a Dynamic DNS account and would like your camera to update the IP address automatically, enable DDNS and enter your host information below. Click on the Next button to continue.

Enable
Disable

Server Address	<<
Host Name
User Name
Password
Timeout	hours

step 3: Server Name Settings

D-Link recommends that you rename your camera for easy accessibility. Please assign a name of your choice before clicking on the Next button.

Camera Name

step 4: Setup Time Zone

Please select the camera's timezone and then click on the Next button.

Current Time
Time Zone

step 5: Setup complete

Here is a summary of your camera settings. Click Back to modify the settings, or click Apply if all settings are correct. It is recommended you write down this information for future access or reference.

	IP Address
	IP Camera Name
	Time Zone
	DDNS