1. Q:
    2. How do I setup and install my DCH-S161 water sensor ?
    1. A:
    2. Step 1: Download and install the mydlink app on your Android OS/Apple iOS device.


      Step 2: Launch the mydlink App


      Step 3: Tap Create a New Account, Enter the information required and then tap Sign Up


      Note: (If you already have a mydlink account, tap Sign In, and then Sign In with your account information)





      Step 4: Tap Add device 





      Step 5: Tap Scan





      Step 6: Connect the sensor cable to the water sensor, then tap Next





      Step 7: Remove the battery cover and insert the 2 AA Batteries, then tap Next





      Step 8: Wait for the LED to flash orange, then tap Next






      Step 9: Select the Wi-Fi network you want to connect the DCH-S161 to, and enter your Wi-Fi password. Then tap on Confirm






      Step 10: Rename the DCH-S161 and set a designated contact (Optional)


      tap Next 





      Step 11: Tap Done




      Step 12: Place or mount the device's main unit where it WILL NOT come into contact with water


      Tap Next 




      Step 13: The DCH-S161 will go into sleep mode a few minutes after install. When in sleep mode, the power LED will be off. The sensor will automatically wake up, turn on the alarm and send a push notification to your mobile device when water is detected.


      Tap Next 




      Step 14: Tap Got it 




      Step 15: Tap OK









Did you find this article useful? Yes No