1. Q:
    2. Why is my Wi-Fi range extender not connecting with WPS button?
    1. A:
    2. Some routers/modem may have the WPS button disabled by default. You also may need to press the WPS button for a little longer on your wireless router/AP  (5-7 seconds)


      If you have already tried the WPS button setup and the LED on the range extender does not turn green, then try the WPS setup again by following the steps below.


      Step 1: Wait for the LED on the DAP to blink amber. Press and hold the WPS button for 3 seconds on your wireless router/AP.  (Some routers/AP's may require you to hold it a little longer)

      NOTE: Make sure the WPS/Wi-Fi LED on your wireless router/AP is blinking, after pushing the WPS button


      Step 2: Once confirmed the WPS/Wi-Fi light is blinking on your router, within one minute press and hold the WPS button on the Range Extender for 2-3 seconds. The LED should start to blink green. Once it makes connection with your router the LED will stop flashing and turn solid GREEN. (This may take up to 3 minutes)


      NOTE: If the range extender still does not turn green then please take a look at this FAQ - How do I setup my range extender using the QRS Mobile app?

Did you find this article useful? Yes No