Product Page: WBR-2310 Hardware Version: A1   Firmware Version: 1.04
Setup Advanced Tools Status Support

Wireless Network :

Use this section to configure the wireless settings for your D-Link Router. Please note that changes made on this section may also need to be duplicated on your Wireless Client.

To protect your privacy you can configure wireless security features. This device supports three wireless security modes including: WEP or WPA-Personal.

Wireless Network Settings :

Enable Wireless :  
Wireless Network Name :    (Also called the SSID)
Wireless Channel :  
Enable Auto Channel Scan :  
Super G Mode :
 
Enable Extended Range Mode :
 
802.11g Only Mode :
 
Enable Hidden Wireless :  (Also called the SSID Broadcast)

Wireless Security Mode :

Security Mode :  
Helpful Hints..

Wireless Netowrk Name:
Changing your Wireless Network Name is the first step in securing your wireless network. We recommend that you change it to a familiar name that does not contain any personal information.

Auto Channel:
If you are not utilizing Super G with Dynamic Turbo for it's speed improvements, we recommend that you Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on.

Hidden Wireless:
Enabling Hidden Mode is another way to secure your network. With this option enabled, no wireless clients will be able to see your wireless network when they perform scan to see what's available. In order for your wireless devices to connect to your router, you will need to manually enter the Wireless Network Name on each device.

Securty Keys:
If you have enabled Wireless Security, make sure you write down WEP Key or Passphrase that you have configured. You will need to enter this information on any wireless device that you connect to your wireless network.

Copyright 2004-2005 D-Link Systems, Inc.