1. Q:
    2. How do I log into my mydlink camera?
    1. A:
    2. There are TWO ways to log into your mydlink camera: This example uses the DCS-5010L and DCS-942L however, these steps will work with ANY mydlink enabled camera.


      Option 1: mydink Portal

      Option 2: Using the Camera IP Address




      mydlink portal 


      Step 1: Go to www.mydlink.com and log into your account

      Step 2: Select your mydlink camera and click on the Settings Tab



      Step 3: Click on Advanced Settings


      Note: You may be prompted to enter your camera's username and password. The default username is admin and there is no password.


      If you do not remember your camera's password, click - How do I recover my mydlink camera's admin password?




       

      Using the Camera IP Address


      Note: In order to find the IP address of your camera, you MUST be connected to the same network as your camera. 


      Step 1: Launch the Install Wizard for your mydlink camera


      Step 2: Click Next until the wizard searches for your camera

      Step 3: When the IP is found, open your web browser and enter the IP address of your camera into the address bar. (eg. http://192.168.145.66)


      Note: You will be prompted to enter your cameras username and password. The default username is admin and there is no password.


      If you do not remember your camera's password, click - How do I recover my mydlink camera's admin password?



      You should now be logged into your mydlink camera.





Did you find this article useful? Yes No