1. Q:
    2. How do I set up and install my smart plug, sensor or siren?
    1. A:
    2. Please select your device:


      Water Sensor / Siren

          - DCH-S160 /DCH-S220


      Smart Plugs 

           - DSP-W110

           - DSP-W215


      Motion Sensor 

          - DCH-S150




      DCH-S160


      Note: This example shows the setup using Android OS. Apple/iOS setup should be the same/similar 




      Please select your desired setup method:


      - WPS - Select this method if you have a WPS enabled router
      - Manual - Select this method if you DO NOT have a WPS enabled router

      Note: WPS (Wi-Fi Protected Setup) is a feature of a router that allows you to press a button on your router when connecting devices. All newer routers support this feature. 

      If your router is WPS supported, it will have a WPS button located on the back or side of it. On D-Link standard routers, it is located on the side, on newer "Canister" style, it is located on the back 



       

      WPS


      Step 1: Plug in the DCH-S160, the LED on the side will turn RED, and then will flash ORANGE (If the light turns green, it means sensor is connected to your network)  


      Step 2: Download and launch the mydlink Home mobile app 





      Step 3: Sign in to your existing mydlink account, or create a new account

      Step 4: Tap the gear icon at the top left and tap Add New Device 


      Step 5: Tap Manual Setup > Sensor and select your Sensor




      Step 6: Follow the prompts, selecting WPS

      You will be prompted to Press the WPS button on your router, once done, tap WPS to proceed. 




      Step 7: Press and hold the WPS button on the side of the DCH-S160 for 3-5 seconds. The LED will start to flash, tap Next


      Step 8: When the LED on the DCH-S160 turns solid GREEN, tap Next 



      Step 9: Enter the PIN code for the DCH-S160 and click next. The app will now scan for your DCH-S160 (If the sensor cannot be found, check the LED to ensure that it is solid Green. Also check that your mobile device is connected to the same wifi network you are trying to connect your DCH-S160 to)

      Note: If you did not scan the QR code at the beginning of the setup, you will be prompted to enter the Pin Code of the DCH-S160

      (The pin code can be found on the quick install card or on the back of the device) 


      Step 10: Click Confirm to confirm time zone, then enter a name for the device and select an image/icon (optional) and tap Finish 



      Setup is Complete



      Manual


      Step 1: Plug in the DCH-S160, the LED on the side will turn RED, and then will flash ORANGE (If the light turns green, it means sensor is connected to your network) 




      Step 2: Download and launch the mydlink Home mobile app 



      Step 3: Sign in to your existing mydlink account, or create a new account


      Step 4: Tap the gear icon at the top left and tap Add New Device 




      Step 5: Tap Manual Setup > Sensor and select your Sensor



      Step 6: Follow the prompts, selecting Manual Setup.




      Step 7: Minimize the app and connect to the default wireless signal of your DCH-S160.

      Eg.DCH-S160-XXXX (The exact wifi name can be found on the back of the sensor / configuration card




      Once connected to the wifi network, go back into the mydlink Home app to continue 


      Step 8: Enter the PIN code for the DCH-S160 and click next. The app will now scan for your DCH-S160 (If the sensor cannot be found, check the LED to ensure that it is solid Green. Also check that your mobile device is connected to the same wifi network you are trying to connect your DCH-S160 to)


      Note: If you did not scan the QR code at the beginning of the setup, you will be prompted to enter the Pin Code of the DCH-S160

      (The pin code can be found on the quick install card or on the back of the device) 




      Step 9: The DCH-S160 will scan for available wireless networks. Select the wireless network you want to connect the sensor to and enter its wifi password if applicable.



      Step 10: The DCH-S160 will attempt to connect to the wireless signal. Once connected, the Status LED on the side should turn solid GREEN


      Step 11: The app will now scan for your DCH-S160 


      Note: If the sensor cannot be found, check the LED to ensure that it is solid Green. Also check that your mobile device is connected to the same wifi network you are trying to connect your DCH-S160 to

       


      Step 12: Click Confirm to confirm the Time Zone then Enter a name for the device and select an image/icon (optional) and tap Finish




      Setup is complete





      DSP-W215/W110


      Note: This example shows the setup using Android OS. Apple/iOS setup should be the same/similar 




      Please select your desired setup method: 


      - WPS - Select this method if you have a WPS enabled router
      - Manual - Select this method if you DO NOT have a WPS enabled router


      Note: WPS (Wi-Fi Protected Setup) is a feature of a router that allows you to press a button on your router when connecting devices. All newer routers support this feature. 

      If your router is WPS supported, it will have a WPS button located on the back or side of it. On D-Link standard routers, it is located on the side, on newer "Canister" style, it is located on the back  



      WPS


      Step 1: Plug in the DSP-W215, the LED on the side will turn RED, and then will flash RED (when not connected)



      Step 2: Download and launch the mydlink Home mobile app



      Step 3: Sign in to your existing mydlink account, or create a new account

      Step 4: Tap the gear icon at the top left and tap Add New Device




      Step 5: Tap Manual setup > Smart Plug and select your Smart Plug




      Step 6: Follow the prompts, selecting WPS.

      You will be prompted to Press the WPS button on your router, once done, tap WPS to proceed.



      Step 7: Press and hold the WPS button on the side of the DSP-W215 for 3-5 seconds. The LED will start to flash, tap Next


      Step 8: When the LED on the DSP-W215 turns solid GREEN, tap Next



      Step 9: Enter the PIN code for the DSP-W215 and click next. The app will now scan for your DSP-W215 (If the sensor cannot be found, check the LED to ensure that it is solid Green. Also check that your mobile device is connected to the same wifi network you are trying to connect your DSP-W215 to)

      Note: If you did not scan the QR code at the beginning of the setup, you will be prompted to enter the Pin Code of the DSP-W215

      (The pin code can be found on the quick install card or on the back of the device)



      Step 10: Click Confirm to confirm time zone, then enter a name for the device and select an image/icon (optional) and tap Finish




      Setup is Complete



      Manual


      Step 1: Plug in the DSP-W215, the LED on the side will turn RED, and then will flash RED (when not connected)



      Step 2: Download and launch the mydlink Home mobile app



      Step 3: Sign in to your existing mydlink account, or create a new account

      Step 4: Tap the gear icon at the top left and tap Add New Device




      Step 5: Tap Manual setup > Smart plug and select your Smart Plug



      Step 6: Follow the prompts, selecting Manual Setup.



      Step 7: Connect to the DSP-W215 Wireless network on your mobile device (DSP-W215)



      (Note: You will need to minimize the app, connect to the network and then re-launch it)

      Once connected to the wifi network, go back into the mydlink Home app to continue

      Step 8: Enter the Pin Code for the DSP-W215 (located on the back of the device or supplied setup card)


      Note: If you did not scan the QR code at the beginning of the setup, you will be prompted to enter the Pin Code of the DSP-W215

      (The pin code can be found on the quick install card or on the back of the device)




      Step 9: Select the Wireless Network to connect the DSP-W215 (IE. Your wireless network)

      Step 10: Enter your WiFi Password (if applicable)



      Step 11: Connect back to your wireless signal (It may automatically re- connected you)

      (Note: You will need to minimize the app, connect to the network and then re-launch it)

      Step 12: The DSP-W215 will attempt to connect to the wireless signal. Once connected, the Status LED should turn solid GREEN

      Step 13: Click Confirm to confirm the Time Zone then Enter a name for the device and select an image/icon (optional) and tap Finish



      Setup is complete




      DCH-S150


      Note: This example shows the setup using Android OS. Apple/iOS setup should be the same/similar 



      Please select your desired setup method:

      - WPS - Select this method if you have a WPS enabled router
      - Manual - Select this method if you DO NOT have a WPS enabled router

      Note: WPS (Wi-Fi Protected Setup) is a feature of a router that allows you to press a button on your router when connecting devices. All newer routers support this feature.

      If your router is WPS supported, it will have a WPS button located on the back or side of it. On D-Link standard routers, it is located on the side, on newer "Canister" style, it is located on the back





      WPS


      Step 1: Plug in the DCH-S150, the LED on the side will turn RED, and then will flash ORANGE (If the light turns green, it means sensor is connected to your network)


       
      Step 2: Download and launch the mydlink Home mobile app 


      Step 3: Sign in to your existing mydlink account, or create a new account

      Step 4: Tap the gear icon at the top left and tap Add New Device


       
      Step 5: Tap Manual Setup > Sensor



      Step 6: Follow the prompts, selecting WPS.

      You will be prompted to Press the WPS button on your router, once done, tap WPS to proceed.


       
      Step 7: Press and hold the WPS button on the side of the DCH-S150 for 3-5 seconds. The LED will start to flash, tap Next



      Step 8: When the LED on the DCH-S150 turns solid GREEN, tap Next


      Step 9: Enter the PIN code for the DCH-S150 and click next. The app will now scan for your DCH-S150 (If the sensor cannot be found, check the LED to ensure that it is solid Green. Also check that your mobile device is connected to the same wifi network you are trying to connect your DCH-S150 to)

      Note: If you did not scan the QR code at the beginning of the setup, you will be prompted to enter the Pin Code of the DCH-S150

      (The pin code can be found on the quick install card or on the back of the device)




      Step 10: Click Confirm to confirm time zone, then enter a name for the device and select an image/icon (optional) and tap Finish




      Setup is Complete





      Manual


      Step 1: Plug in the DCH-S150, the LED on the side will turn RED, and then will flash RED (when not connected)


      Step 2: Download and launch the mydlink Home mobile app


       
      Step 3: Sign in to your existing mydlink account, or create a new account

      Step 4: Tap the gear icon at the top left and tap Add New Device



      Step 5: Tap Manual Setup > Sensor  



      Step 6: Follow the prompts, selecting Manual Setup.

       
      Step 7: Connect to the DCH-S150 Wireless network on your mobile device (DCH-S150)

      (Note: You will need to minimize the app, connect to the network and then re-launch it)

      Once connected to the wifi network, go back into the mydlink Home app to continue



      Step 8: Enter the Pin Code for the DCH-S150 (located on the back of the device or supplied setup card)

      Note: If you did not scan the QR code at the beginning of the setup, you will be prompted to enter the Pin Code of the DCH-S150




      Step 9: Select the Wireless Network to connect the DCH-S150 (IE. Your wireless network)

      Step 10: Enter your WiFi Password (if applicable)



      Step 11: Connect back to your wireless signal (It may automatically re-connected you)

      (Note: You will need to minimize the app, connect to the network and then re-launch it)

      Step 12: The DCH-S150 will attempt to connect to the wireless signal. Once connected, the Status LED on the side should turn solid GREEN

      Step 13: Click Confirm to confirm the Time Zone then Enter a name for the device and select an image/icon (optional) and tap Finish


       
      Setup is complete






Did you find this article useful? Yes No